P|Flux: 2 Cyclone Dust Collector

$3,149.00 $2,599.00
(You save $550.00)
Write a Review
SKU:
MDCPF22201
Weight:
408.00 LBS

-- This product does not qualify for free shipping --

P|Flux: 2 Cyclone Dust Collector

When lifting the drum into position a connector on the back of drum automatically hooks up to a pipe in cyclone this way creating a low pressure in bottom of the drum, this is designed to hold down plastic bag to avoid it being sucked up into the cone during use, no other cyclone or dust system has such a smart system, it is a vast improvement over last generation.

If you chose to use the p|flux without a bag you can simple shut off the system using a valve offering you speed and flexibility.

  • Motor HP: 2 HP
  • Phase: 1
  • Voltage: 220V
  • Amps: 14 Amps
  • Hertz: 60
  • Plug: No
  • RPM: 3450
  • Control Panel: Embedded Anodized Aluminum w. Magnetic On/Off
  • LED Drum: : Probe activates LED when drum is full
  • LED Canister:: Sensor detects rise in static pressure inside HEPA Filter & activates LED
  • Hand Held Remote Control: High Frequency
  • Real CFM: 1166
  • Nominal CFM: 1740
  • Max Static Pressure (inches of water): 9.3″
  • Impeller/Fan Size: 14.5″
  • Impeller Material: Steel
  • Impeller Type: Radial Fin
  • Balanced: ISO 1940
  • Inlet Diameters: 6″ by 4″ x 2 ports
  • Drum Capacity: 46 Gal.
  • Octagon Drum: Low Pressure Suction
  • Drum Collection Bag (Dia. x L): Plastic Bag (Ø610 x 950mmL)
  • Canister Filter Type: HEPA
  • Filtration Efficiency: 0.4micron @ 99.2%
  • MERV Rating: 16+/Refer to tab 4
  • Canister Diameter: Ø400mm (15.75″)
  • Canister Length: 900mm (35.43″)
  • Filter Surface Area: 9.5m²/109ft²
  • Canister Cleaning: Clean using external air compressor (not incl)
  • Canister Flter Lower Dust Collection: Metal end cap with 4″ hookup
  • Wheels: (4x) 4″ PU Caster
  • US/CSA Approved: Yes
  • Decibel Reading: 76 d B(A) (@9.8ft)
  • Machine Weight: 154kgs/340Lbs
  • Shipping Weight: 185kgs/408Lbs
  • Assembled Dimensions: (L x W x H)1178 x 690 x 2025 mm