 |
Festool DF500Q-SET
Domino Set 420W Joiner w/ Cross Stop and Trim Stop
$981.75 In Stock
Joining has always been a slow, difficult process. Never again, thanks to the Festool Domino joining system. The system consists of the Domino joiner and pre-fabricated, beech and sipo Domino tenons. The Domino joiner, with its revolutionary cutting method, simple indexing features and adjustable mortise sizing, makes flawless mortises every single time. The Domino tenon is equally as impressive - it is 100% rotation-proof and far stronger than either biscuits or dowels. It also has a large gluing surface area for extra strength.
Dust Extraction
Your mortises are clean and ready for glue when the Domino is used in combination with a dust extractor. Proper dust extraction greatly extends cutter life
Depth Control
Quick, precise adjustment for five different mortising depths, relative to the size of the tenon required for the application
Stepped Height Stop
7 different step positions for different material thicknesses for fast and easy fence height adjustment.
Pivoting Fence
Fence creates angled mortises from 0-90° with positive stops at 22.5°, 45°, 67.5°
Mortise Width Adjustment
Adjusting the width of the mortise allows for easier alignment when joining panels
Rapid Bit Change
Means you can change a bit in under 30 seconds to match desired tenon size
Positioning
With an adjustable fence angle, retractable stop flaps, adjustable cutter height with step gauge, and precise mortise depth stop, the Domino joiner enables precise mortise placement and spacing
Carbide Tip Spiral Bit
Durable, long-lasting bit withstands 5,000-14,000 joints depending on material
Patented Routing Principle
The spiral cutter rotates and oscillates to create perfect mortises
DOMINO slot cutter diameter: 5/6/8/10 mm
Miter routing 0-90°; stop positions at 0°, 22.5°, 45°, 67.5°, 90°
Movable stepped stop: 16/20/22/25/28/36/40 mm
Routing depth stop (12/15/20/25/28 mm)
Routing height adjuster with scale (5-30 mm)
Includes D5 cutter, plug-it power cord, support bracket, wrench, SYS2 Systainer, cross stop, trim stop
Note: Some images may display accessories which are not included with actual tool.
Specifications
Voltage: 120 V
Amperage: 4 A
RPM: 24,300 RPM
Precision Adjustment: Yes
Spindle/Blade Lock:
Related Items:
|
