 |
Festool HL850E-PLUS
3-15/64" 850W Planer with Unlimited Rabbeting Capacity
$589.05 In Stock
Using an electric planer right up to the edge or on rabbets often produces unsatisfactory results, as the machine leaves a lip that has to be removed by hand—unless you have the Festool HL 850 planer. The HL 850 lets you cut flush to an adjacent surface because it can plane across the entire width of the rabbet. Because the planer head is mounted to one side, it sits flush with the opposite side of the planer housing. The retractable side guard makes planing safer, and it swings up and to the side as the rabbet depth increases. Planing up to the edge in deep rabbets is no longer a problem.
Rotary Handle Depth Adjustment
The front handle doubles as a depth control knob with a cut depth up to 3 9/64".
Converts To A Jointer
With the addition of a bench unit stand and angle stop, the HL 850 becomes a stationary jointer for working edges.
Thumb-Lock Depth Control
Makes depth setting a streamlined one-hand operation so you can easily adjust your depth settings to match the resistance of the material
Near Total Chip Extraction
Efficient chip extraction with left or right side mounting. For best performance use with Festool CT 22 or CT 33 dust extractors and the 36mm hose.
Single Knife Cutter Head
Spiral, metal carbide, cutter head design with replaceable cutting knife for a smooth, “chatter-free” cut.
Unlimited Rabbeting Depth
The planer head allows you to work right up to the edge.
Interchangable Heads
For different effects from distressed to hand-hewn textured effects
MMC Electronics
Equipped with soft-start for no-jolt starts, and constant speed under load, for consistent cutting speed and smooth results
Quick Blade Changes
Loosen 3 screws, replace the blade, tighten back up and that is it! The blade is self-aligning
Includes Parallel guide, rabbet depth guide, solid carbide standard blade, standard planer head, SYS3 Systainer.
Note: Some images may display accessories which are not included with actual tool.
Specifications
Amperage: 7.0 A
Voltage: 120 V
Width of Cut: 3-15/64 "
RPM: 10,000 RPM
Depth of Cut: 0-3.5mm or 9/64 "
Rabbet: Unlimited "
Includes Case: Yes
Related Items:
|
