1. Product Description
Nichigo G-Tape 2010AL is a single sided tape built with a HDPE cloth laminated with LDPE/aluminum foil and
proprietary acrylic adhesive. G-Tape 2010AL provides superior physical properties and easy handling compared with
conventional adhesive tapes.
Base material: Aluminum Foil Laminated Polyethylene Cloth ( Silver)
3 Key Features
3-1) Easy to tear by hands straight - no cutting tool is required
3-2) Safer– tape edge is not as sharp as aluminum foil
3-3) Scrap-less (“face to face contact on adhesive sides” comes off clean)
3-4) Residue free removal from plastics & plastic composite, metals & alloys,
3-5) Repositionable - no wrinkles when applied
3-6) ASTM E84 (UL723) : Class 1, Flame Spread Index 0, Smoke Developed Index 0
4- Physical Properties
4-2) High UV block and resistant
4-3) Wide application temperature -40 ~ 200 degree F
4-4) High dimensional stability
4-5) High chemical and solvent resistance
4-6) 2" x 165' Roll Dimensions
4. Adhesion Properties
(*typical values, not for specification or guarantee purpose)
|Total Thickness||6.7 mil|
|Adhesive Strength||37 OZ/in|
|Holding Power||0.1 mm|
|Tensile Strength||32 lbf/in|
|Testing Method||JIS Z0237|
6-1) Seeming and splicing tape for insulation
6-2) HVAC where UL 181 is not mandated
7. Cautions and How to Use
7-1) Avoid prolonged contact with skin. May cause irritation.
7-2) Do not use as an electrical insulation tape.
7-3) Avoid using on PVC, natural marble stones, unfinished wood, decorated wooden boards,
uncured coating or delicate surfaces. This tape may damage the surfaces and/or leave residue.
Test before use if residue is a concern.
A 91 % isopropyl alcohol (IPA) available at drug stores easily removes residue if any.
7-4) Use only clean, dry surfaces.
7-5) Store in a dark, dry, cool place.