Graco GRAC-FFLP214 Fine Finish Low Pressure RAC X FF LP SwitchTip, 214


Spray at up to 50% lower pressure with the Reverse-A-Clean (RAC) 214 Fine Finish Low Pressure (FF LP) RAC X SwitchTip. This fine finish tip produces a 4 to 6 inch fan pattern and a 0.014 inch orifice. Reverse the SwitchTip to easily clear clogs.

For fine finish applications

  • Less Prep & Cleanup Time
    • Less mess with less overspray
    • Put the paint where you want it
  • Easiest Pattern Overlap
    • Softer spray fan pattern
    • Easy to apply any material to any surface
    • Consistent blended finish quality
  • Extended Life
    • Spraying at half pressure doubles tip life
    • Reduced sprayer maintenance – up to 2X life
  • SmartTip Technology
    • Exclusive internal tip geometry
    • Reduces energy required to atomize paints, stains, and other materials
    • Delivers a superior finish with less pressure
    • Works with SmartControl on select Graco sprayers
  • Best Tip on the Market
    • Works with any airless sprayer
    • Longest lasting fan pattern
    • Highest quality finish with a consistent spray pattern
  • Easy to Identify Tip SizeSuperior Tip Design
    • Large raised tip size numbers are always legible – even when covered with paint
    • Locking tab ensures tip stays securely in guard
    • Snaps tip in spray or reverse position
    • OneSeal tip gasket installs with no tools
    • Solvent seal available when using extremely hot solvents

Technical Specifications

Compatible material Primer, stains, varnish, water-based paint, enamel, latex, solvent-borne paints
For use with RAC X HandTite Tip Guard 
Material Tungsten carbide
Maximum fan width 6 in
15.2 cm
152 mm
Minimum fan width 4 in
10.2 cm
102 mm
Maximum flow rate 0.21 GPM
0.79 L/min
Maximum working pressure 4050 psi
28000 kPa
Model RAC X
Orifice Diameter 0.014 in
0.0356 cm
0.3556 mm
Pattern size 4 to 6 in
101.6 to 152.4 mm
Spray pattern Fan
Tip type Airless
Type Spray tip
Document Warning insert