Features a tap-and-go trimmer head, bike-type handle, double loop harness and 4-tooth steel-brush cutting blade kit for more serious work.

Features

• Bike-style handlebar with fingertip controls
• Includes Semi-Matic (tap-and-go) trimmer head and 4-tooth brush-cutting blade with blade guard and mounting hardware, as well as professional double-loop harness and protective goggles
• Multi-strand drive cable that absorbs vibration and impacts
• 25 cc Honda GX25 OHC Mini 4-stroke engine
• Electronic ignition for dependable starts
• Low-tone muffler for quieter operation
• Bevel gear drive

Specifications

• Engine Type: Honda GX25, mini 4-stroke, OHC, single cylinder air-cooled multi-position (360°)
• Honda Engine Model: GX25
• Displacement: 25 cc (1.53 CID)
• Bore & Stroke: 35 X 26 mm (1.4 X 1 in.)
• Maximum Net Torque: 1.0 NM (0.74 lbf-ft.) @ 5,000 RPM
• Idle Speed: 3,100 ± 200 RPM
• Max. No-Load RPM* (Requires Blade Barrier): 10,000 RPM
• Ignition System: Transistorized flywheel magneto (electronic)
• Spark Plug: CMR5H (NGK)
• Cooling System: Forced air
• Starting System: Recoil starter
• Stopping System: Ignition primary circuit ground
• Carburetor: Diaphragm type w/fuel pump
• Recommended Fuel: Regular unleaded gasoline (87 Octane)
• Fuel Primer: Anti-flood type
• Fuel Capacity: 0.5 L (17.6 fl. Imp. oz.)
• Fuel Consumption (approximate)**: 0.5 L/hr. (0.11 Imp. gal./hr.)
• Clutch Drive Type: Centrifugal Twin Shoe-Clutch
• Clutch Size: 54 mm (2.125 in.) Diameter
• Clutch Engagement: 4;200 ± 200 RPM
• Air Cleaner: Semi-dry type
• Lubrication System: Oil mist
• Oil Capacity: 80 cc (2.82 fl. Imp. oz.)
• Recommended Oil: SAE 10W30 API service classification SJ or later

Dimensions

• Overall Length With Cutter Mounted: 191.0 cm (75.2 in.)
• Overall Width: (handlebars) 60.5 cm (23.8 in.)
• Overall Height: 41.5 cm (16.3 in.)
• Dry Weight (Without Blade): 6.15 kg (13.6 lbs.)

Additional Info

• Handle Type: U-shaped (bike type handle)
• Throttle Control Type: Two-motion trigger type
• Engine Stop Switch: Slide type switch
• Cutting Head (Standard): Semi-Matic line feed nylon (tap-and-go)
• Cutting Head (Optional): Manual, pro-tap, semi-pro
• Cutting Width: 43.2 cm (17 in.)
• Line Type: Quiet Line
• Cutting Line Diameter: 2.41 mm (0.095 in.)
• Anti-Vibration System: Standard
• Drive Shaft Type: Flexible steel cable
• Final Drive Gear Case: Helical cut bevel gears / Sealed ball bearings
• Gear Ratio: 1.235 Input shaft: 1 (Output Shaft)
• Main Pipe Diameter: 25.4 mm (1 in.)
• Main Pipe Thickness / Material: 1.5 mm (0.06 in.) / Aluminum
• Trimmer Guard With Cutter: Standard
• Steel Blade Guard: Standard
• Shoulder Harness: n/a
• Professional Double Loop Harness: Standard
• Safety Goggles (A.N.S.I Std.): Standard