Unique parallelogram support system allows the table to move in the same arc as the cutterhead when raised or lowered. This uniform, close clearance to the cutting blade acts as a more efficient chip breaker.Cabinet stand completely encases motor and pulleys to protect from dust and shavings.The specially-designed cast-iron fence is extra long for continued support throughout the cut.Modular cutterhead provides a consistently clean cut.
Jack-screw arrangement allows easy replacement and adjustment of individual knives. In the event the entire cutter-head has to be removed, a new module can be fitted in place without production down-time. The extra-long table provides a full 83” of work support. The Laguna ShearTec II is at the cutting edge of Spiral Cutter head technology today. Deep gullets allow chips to exit fast & keep the head clean. The inserts are made from thicker solid German carbide & set into the head on a flat surface rather than a cone design. This allows more torque to be used when tightening the inserts. All of the inserts are slightly angled to give a shear type cut with low impact & less kick-back action. The leading edge is crowned to minimize lines appearing. Laguna ShearTec II heads are all 6 row; most competitors’ heads offer just 3 or 4 rows. There obviously are a host of benefits associated from the additional rows: More carbide inserts, longer life, less noise and vibration, less kick-back & smoother finish.There obviously are a host of benefits associated from the additional rows: More carbide inserts, longer life, less noise and vibration, less kick-back & smoother finish.
- Motor: 3 HP, 220 Volt, 1 Phase, TEFC
- Motor Amperage Rating: 13A
- Cutter-Head RPM: 5000RPM
- Adjustment: Parallelogram w. Crank
- Max. Width: 8”
- Max. Depth: ½”
- Rabbeting Capacity: ½”
- Knife System: Shear-TecII
- 4 Sided Carbide 6 Row X 9 = 54
- Cutter-Head Diameter: 3”
- Table Dimensions: 8” X 83”
- Fence Dimensions: 4 ¾” X 40”
- Fence Tilt: 90° & 45° with Positive Stop
- Table Height: 33”
- Dust Port: 4”
- Wheel System: Built-In
- Weight (Net/Ship): 648/750 Lbs.