INCLUDES
- 1/2" Cordless Hammer Drill / Driver with Brushless Motor (DHP486Z)
- 1/4" Cordless Impact Driver with Brushless Motor (DTD171Z)
- Two 18V (5.0 Ah) Li-Ion Batteries BL1850B (196675-2)
- Rapid Charger (DC18RC)
- Plastic Carrying Case (143603-8)
**NEW 2021 DTD171Z 1/4" Cordless Impact Driver with Brushless Motor**
Variable 4-Speed, Reversible
Features NEW "Quick Change Memory Mode"
- eXtreme Protection Technology (XPT) offers maximum protection against dust, debris and liquids for optimal performance in extreme conditions
- 4 stage impact power selection + TEK 1, TEK 2, 'Cam-Out' and Auto-Stop modes to ensure precise fastening and prevent damage to fasteners
- 'Cam-out' elimination mode operates at low speed until fastening begins to eliminate 'cam-out' and cross-threading
- 2-stage TEK modes reduce impact power during final stages of fastener seating in thick or thin metal
- Auto stop mode stops impact and rotation in 0.2 seconds after fastener is loosened (when trigger is fully depressed in reverse rotation)
- Quick-change memory mode allows operator to rapidly toggle between two registered settings
- Enhanced anvil holder rigidity with ball bearings reduces bit wobbling
- LED charge level indicator displays approximate remaining battery power
- Brushless DC motor with high power to weight and size ratio
- Brushless DC motor generates less heat buildup and is ideal for prolonged use in manufacturing / production applications
- Battery protection system provides over-discharge, temperature and current protection for enhanced performance, battery cycle life and overall battery life
- Twin LED job lights with pre-glow and afterglow features
- Ergonomic soft rubber grip design for vibration absorption and comfortable operation
SPECIFICATIONS
- Battery Capacities: 18V Li-Ion
- Hex Shank: 1/4"
- No Load Speed: 0 - 3,600/3,200/2,100/1,100 RPM
- Impacts Per Minute: 0 - 3,800/3,600/2,600/1,100 IPM
- Maximum Torque: 1,590 in. lbs (180 Nm)
- Vibration Level: 13.5 m/s2
- Noise Level: 97 dB(A)
- Overall Length: 4-9/16" (116 mm)
- Net Weight: 2.0 lbs (0.9 kg)
DHP486Z 1/2" Cordless Hammer-Drill/Driver with Brushless Motor
Variable Speed, Reversible, Electric Brake
Up to 1,155 in. lbs. Max Fastening Torque!
- Brushless DC motor with high power to weight and size ratio
- Brushless DC motor generates less heat buildup and is ideal for prolongeduse in manufacturing / production applications
- eXtreme Protection Technology (XPT) offers maximum protection against dust, debris and liquids for optimal performance in extreme conditions
- Battery protection system provides over-discharge, temperature and circuit protection for enhanced performance, battery cycle life and overall battery life
- 21 clutch settings + drill mode deliver up to 1,150 in. lbs. of torque
- All metal gears for more efficient power transmission
- Ultra-compact design (only 7" long)
- Dual LED job lights with afterglow feature
- Ergonomic soft rubber grip design for vibration absorption and comfortable operation features re-contoured rear grip portion and ribbed grip for improved hold
SPECIFICATIONS
- Battery Capacities: 18V Li-Ion
- Capacities:
- Concrete 5/8" (16 mm)
- Steel 1/2" (13 mm)
- Wood Auger bit 2" (50 mm), Self-feeding bit 3" (76 mm), Hole saw 6" (152 mm)
- No Load Speed:
- Low: 0 - 550 RPM
- High: 0 - 2,100 RPM
- Blows Per Minute:
- Low: 0 - 8,250 BPM
- High: 0 - 31,500 BPM
- Maximum Lock Torque: 1,150 in. lbs (130 Nm)
- Vibration Level: 8.0 m/s²
- Noise Level: 84 dB(A)
- Overall Length: 7" (178 mm)
- Net Weight: 4.5 lbs (2.0 kg)