null

SawStop SAW-PCS175TGP252 Professional Cabinet Saw 1.75Hp, 120V, 60Hz, 10" with 52" Fence

$3,762.00
SKU:
SAW-PCS175-TGP252

PROFESSIONAL GRADE PERFORMANCE FOR EVERYONE

The SawStop® 10" Professional Cabinet Saw provides superior performance to meet the demands of discerning craftsmen and woodworkers. With SawStop’s legendary safety system, ground breaking dust collection and flawless fit and finish it’s ready to help you get the job done.

Now the Professional Cabinet Saw is available in a 1.75HP motor configuration. Plug in anywhere with 110 volt convenience!

SPECIFICATIONS:
Motor: (all 60Hz, TEFC): 1.75 or 3 hp available
Cabinet footprint: 19 3/8″ w x 19 3/8″ d
Cast iron table: 20″ w x 27″ d
Cast iron table (w/ extension wings): 44″ w x 27″ d
Extension wings: 12″ w x 27″ d each
Extension table 30 in rails: 12" w x 27" d
Extension table 36 in rails: 23 3/4″ w x 27″ d
Extension table 52 in rails: 40 1/8″ w x 27″ d
Weights - table saw only: 317 lb (1.75 hp), 335 lbs (3 hp)
Weights - w/ 30 in fence systems: 367 lb (1.75 hp), 380 lbs (3 hp)
Weights - w/ 36 in fence systems: 408 lb (1.75 hp), 426 lbs (3 hp)
Weights - w/ 52 in fence systems: 431 lb (1.75 hp), 449 lbs (3 hp)
Weights - (optional cast iron wings): N/A
Shipping weight (approx.): 390 lb (table saw only)
Blade: 40-tooth, 5/8″ arbor
Blade diameter: 10″
Blade tilt: Left
Blade kerf: 0.118″ (3mm)
Blade plate thickness: 0.078″ (2mm)
Max. depth of cut, blade at 0º: 3 1/8″
Max. depth of cut, blade at 45º: 2 1/4″
Max. rip, right of blade - 30 in: 30″ (w/ 30″ rails)
Max. rip, right of blade - 36 in: 36″ (w/ 36″ rails)
Max. rip, right of blade - 52 in: 52″ (w/ 52″ rails)
Max. rip, left of blade: 12"
Max. rip, left of blade (options): N/A
Dado diameter: 8″ (requires 8R2 brake, dado insert)
Dado max. width: 13/16″
Arbor diameter at blade: 5/8″
Main bearing size: 62mm OD x 30mm ID
Second bearing size: 52mm OD x 25mm ID
Table in front of blade (max. elevation): 10 1/4″
Table behind blade (max. elevation): 7 1/2″
Arbor Runout: 0.001″ Maximum allowable runout
Table flatness measured diagonally: 0.010″ Maximum gap
Blade alignment with miter slot: 0.010″ Maximum displacement
Deviation of miter gauge indexing stops from actual: ±0.25º
Alignment between splitter and blade: 0.010″ Maximum difference
Miter slots T-shaped: 3/4″ at top, 1″ at bottom, 3/8″ deep
Miter slots center: 11 1/8″ center-to-center
Miter slots info: 5 1/2″ (arbor flange to center of right slot)
Dust collection port diameter: 4″
Riving knife / splitter thickness: 0.090" (2.3 mm)
Blade guard (dust collection): polycarbonate, extends 1 3/16" right of blade (3HP)
Blade guard (micro guard): polycarbonate, extends 1″ right of blade (1.75HP)
Insert: zero clr., phenolic core, melamine surfaces
Hand wheels: 7″ diameter, cast iron w/ chrome handle
Belts: 2 V-ribbed belts – arbor b. static dissipative
Overall saw dimensions: 44″ w x 29 3/4″ d x 34″ h
Overall saw dimensions 30 in: 61 3/4″ w x 31 1/8″ d x 34″h
Overall saw dimensions 36 in: 69 1/8″ w x 33″ d x 34″ h
Overall saw dimensions 52 in: 85 1/4″ w x 33″ d x 34″ h
Motor configuration 1:PCS175: 1.75 hp, 110v, 14 A
Motor configuration 2: (user config. to 220v w/optional kit)
Motor configuration 3: PCS31230: 3 hp, 1 phase, 230 V, 13 A