The SawStop 10" Professional Cabinet Saw provides superior performance to meet the demands of discerning craftsmen and woodworkers. With SawStop legendary safety system, ground breaking dust collection and flawless fit and finish it’s ready to help you get the job done.
Now the Professional Cabinet Saw is available in a 1.75HP motor configuration. Plug in anywhere with 110 volt convenience!
Includes
- (2) cast iron extension wings
- (1) miter gauge
- (1) micro blade guard (1.75hp models)
- (1) dust collection blade guard (3hp models)
- (1) riving knife
- (2) blade wrenches
- (1) push stick
- (1) 10” blade
- (1) table insert
- (1) standard brake cartridge
- (1) owner’s manual
- (2) hardware packs
- (1) 3mm hex key
- (1) 5mm hex key
- (1) 8mm hex key
- (1) blade spacing adjustment gauge
Specifications
- Motor: (all 60Hz, TEFC):1.75
- Cabinet footprint: 19 3/8″ w x 19 3/8″ d
- Cast iron table: 20″ w x 27″ d
- Cast iron table (w/ extension wings): 44″ w x 27″ d
- Extension wings: 12″ w x 27″ d each
- Extension table 36 in rails: 23 3/4″ w x 27″ d
- Weights - table saw only: 317 lb (1.75 hp)
- Weights - w/ 36 in fence systems: 408 lb (1.75 hp)
- Weights - (optional cast iron wings): N/A
- Shipping weight (approx.): 390 lb (table saw only)
- Blade: 40-tooth, 5/8″ arbor
- Blade diameter: 10″
- Blade tilt: Left
- Blade kerf: 0.118″ (3mm)
- Blade plate thickness: 0.078″ (2mm)
- Max. depth of cut, blade at 0º: 3 1/8″
- Max. depth of cut, blade at 45º: 2 1/4″
- Max. rip, right of blade - 36 in: 36″ (w/ 36″ rails)
- Max. rip, left of blade: 12"
- Dado diameter: 8″ (requires 8R2 brake, dado insert)
- Dado max. width: 13/16″
- Arbor diameter at blade: 5/8″
- Miter slots T-shaped: 3/4″ at top, 1″ at bottom, 3/8″ deep
- Miter slots center: 11 1/8″ center-to-center
- Miter slots info: 5 1/2″ (arbor flange to center of right slot)
- Dust collection port diameter: 4″
- Riving knife / splitter thickness: 0.090" (2.3 mm)
- Blade guard (dust collection): polycarbonate, extends 1 3/16" right of blade (3HP)
- Blade guard (micro guard): polycarbonate, extends 1″ right of blade (1.75HP)
- Insert: zero clr., phenolic core, melamine surfaces
- Hand wheels: 7″ diameter, cast iron w/ chrome handle
- Belts: 2 V-ribbed belts – arbor b. static dissipative
- Overall saw dimensions: 44″ w x 29 3/4″ d x 34″ h
- Overall saw dimensions 36 in: 69 1/8″ w x 33″ d x 34″ h
- Motor configuration 1:PCS175: 1.75 hp, 110v, 14 A
- Motor configuration 2: (user config. to 220v w/optional kit)