The Laguna 6” Jointer with ShearTec II is a premium jointer giving you more of everything.Enclosed stand makes a stronger base, 1.5 HP gives you more power, longer beds (56”) allows for bigger jobs and last but not least: 6 row ShearTec II cutterhead with a total of 42 four-sided carbide inserts gives you the smoothest cut & longest life.The Laguna ShearTec II is at the cutting edge of Spiral Cutterhead technology today. Deep gullets allow chips to exit fast & keep the head clean. The inserts are made from thicker solid German carbide & set into the head on a flat surface rather than a cone design. This allows more torque to be used when tightening the inserts. All of the inserts are slightly angled to give a shear type cut with low impact & less kick-back action. The leading edge is crowned to minimize lines appearing.
Laguna ShearTec II heads are all 6 row; most competitors’ heads offer just 3 or 4 rows. There obviously are a host of benefits associated from the additional rows: More carbide inserts, longer life, less noise and vibration, less kick-back & smoother finish.
There obviously are a host of benefits associated from the additional rows: More carbide inserts, longer life, less noise and vibration, less kick-back & smoother finish.
- Motor 1.5 HP, 110 Volt, TEFC
- Motor Amperage Rating: 13A
- Cutter-Head: 5000 RPM
- Adjustment: Wedge-Bed w. Lever
- Cutting Width: 6”
- Cutting Depth: ½”
- Rabbeting Capacity: ½”
- Knife System: ShearTecII
- 4 Sided Solid Carbide 6 Rows X 7 = 42
- Cutter-Head Diameter:2.4”
- Table Dimensions: 6” X 56”
- Fence Dimensions: 4” X 29”
- Fence Tilt: 90° & 45° with Positive Stop
- Table Height: 32.2”
- Dust Port: 4”
- Wheel System: Built-In• Weight (Net/Ship) 388/425 Lbs.