This pad saver for backing pads has a 3 mm protective interface.
The 3 mm thick multi interface pad is used in combination with hook & loop sanding discs for sanding rounded surfaces and contours, with Mirka's net products. Using the multi interface pad will also produce a softer result. The multi Interface pad is placed between the backing pad and the sanding disc.
Mirka's pad savers are designed to protect the backing pad from wear and tear, when sanding aggressively and continuously with net products. These cost effective pad savers, placed between the backing pad and the sanding disc, should be changed regularly. The pad savers prolong the life of the backing pad.
Match the pad saver hole pattern to the backing pad by locating the matching holes on the pad saver to the locating spots on the backing pad.
Apply and press the pad saver firmly to the backing pad. Fasten the abrasive to the pad saver.
Place the sander on the object to be sanded and then start the sanding machine.