The ratchet that can also be safely and officially used as a hammer. The KOLOSS is a reversible, heavy-duty ratchet that can be used with a load of at least 600 Newton meters. The dual ratchet teeth and the minimum return angle of only 6° ensure rapid and precise screwdriving even in confined situations. And the best thing: absolutely no impact on the hammer faces, however hard, can destroy the ratchet mechanism. Multi-component KraftForm handle optimized to withstand pressure, impact and tensile loads; take-up for KOLOSS extension 8780 C and KOLOSS centering pin 8781 C at end of handle. Also included in the set: 1 pad to protect materials and surface areas, 1 Koloss extension for the transfer of even more torque, 1 unlocking pin and 1 holster – so the Koloss can always be at hand.

Features

• For loads of at least 600 Newton meters
• Push-through square drive for right/left switchover
• Including hammer function
• Multi-component KraftForm handle optimized to withstand pressure, impact and tensile loads
• Fine-pitched ratchet mechanism, small return angle of 6°

Includes

• 8002 C - 1x 1/2"x341 mm
• 8780 C - 1x 341x137 mm
• 8000 HLF - 1x 175x75 mm
• 8782 C - 1x # 2x50 mm
• 8000 E - 1x 40.5 mm

The heavy-duty ratchet that can also be safely used as a hammer.

Typical fields of application are mechanical engineering, boatbuilding, mining, aircraft construction, bridge building, commercial vehicle construction and maintenance, railway and road construction and maintenance, industrial plant and equipment construction, high-bay warehouse construction, petroleum industry and many more.

Non-removable sealed and hardened square drive for tough jobs.

Changing the ratchet direction using a hardened push-through square drive ensures great resilience, since there is no susceptible switching mechanism that could be damaged by hammer blows. This is far more robust than a forward/reverse switch.

Tubular shaft minimizes impact vibrations.

Used with rubber pad attachments to protect materials and surfaces.

The drop-forged hammer head is permanently pinned to the shaft in a form-fit joint. This guarantees an almost non-detachable positioning of the hammer head on the handle.

Gives the robust 30 saw teeth the precision engineering effect of 60 fine teeth with a 6° return angle.