The Milescraft PocketJig200 allows you to connect your workpieces quickly with strong and accurate pocket hole joints. Create corner joints, edge joints, T-joints, framing joints, miter joints, and make repairs. With built-in settings for different board thicknesses, just set this pocket jig to your desired setting, set the depth of your bit, and start drilling. This complete kit in a sturdy carrying case comes with all of the bits, drivers, screws and accessories needed to complete any pocket hole project.
Features:
- Spring-loaded sled adjust button allows the jig to be set to do repairs of any nature around your home or your shop
- Built-In Imperial And Metric Scales: The built-in scales allow you to easily measure the thickness of your workpiece
- Hardened Steel Drill Bushings: There are four common board thickness settings built into the pocket jig: 1/2″, 3/4″, 1″ and 1-1/2″ (12, 19, 27, 38mm)
- Easy readout arrow to help define your board thickness setting
- Easily adjust to your board thickness setting with the single sled design and sled adjust button
- Recessed Clamp Pocket with Magnet: Helps to keep the clamp in the same position as you move to different locations
- With the stronger rare earth magnet, you can easily clamp the jig from one location to another
- For speed and accuracy, use the Milescraft FaceClamps
- Convenient Built-In Depth Setting: Easily set your bit for the correct drilling depth
- 3/8″ HSS Step Drill Bit: Made from high-speed steel the PocketBit with a 1/4″ hex shank is designed to reduce clogging and provide smooth and precise holes
- 3/8″ Anti-roll, Split Design Stop Collar: The split design prevents slipping of the set screw when tightened and prevents the bit from rolling. Includes hex key for tightening
- Quick Change Compatible Connector: With the Milescraft Connector, you can quickly change from drilling to driving. Accepts all 1/4″ hex bits. Quickly and easily change from drilling to driving
- 3″ and 6″ Magnetic T20 Torx Drivers: For maximum torque settings without stripping. To allow pocket screws to align with maximum precision
- With designated places for components, you will never have to go digging through your toolbox for your pocket hole jig again
- Storage compartment for 2″ FaceClamp
- Storage slot for PocketJig100
Includes:
- Double Barrel Pocket Hole Jig
- Quick Connect
- 3″ & 6″ T-Star Driver Bits
- 3/8″ PocketBit
- 60 Piece T20 Pocket Hole Screws
- Pocket Plugs
- 3/8″ Split Design Stop Collar with Hex Key
- Instruction Manual
Specifications:
- Material: Reinforced Nylon
- Drill Guide Bushing Spacing: 1″
- Clamping Method: Works with any clamp
- For use with: Wood Materials for 1/2″ to 1.5 thick (12-38mm)
- Drilling Angle: 15°
- Screw and Driver Style: T20 Torx
- Screws: 10 of each: 1” (25mm), 1.25” (32mm) coarse and fine, 1.5” (38mm), 2” (51mm), 2.5” (64mm)
- Drivers: 3″ T20 Magnetic Head Driver and 6″ T20 Magnetic Head Driver
- Pocket Plugs: 10 plugs
- Connector: Accepts all 1/4″ hex bits
- Drill Bit: 3/8″ (9.5mm) HSS Pocket Bit with 1/4″ shank
- Includes: Double Barrel Pocket Hole Jig, Quick Connect, 3″ & 6″ T-Star Driver Bits, 3/8″ PocketBit, 60 Piece T20 Pocket Hole Screws, Pocket Plugs, 3/8″ Split Design Stop Collar with Hex Key and Instruction Manual