Made especially to run 10mm shank dowel drills and boring bits on a CNC machine. Accommodates the flat area on the 10mm round drill bit shank, secure with the 2 set screws (M6), same method as on boring machines. Total Indicated Run-out (TIR) is 0.00118" (0.03mm). Note :When securing drill bit into the adapter, make sure to align the flat part of the shank with both set screws.
Specification:
- (D) Diameter : 3/4
- D1 : 1/2
- Overall Length (L) : 2-7/16
- D1 : 10mm
- L1 : 1-1/16
Warning:
- Max RPM = 10,000