For cutting aluminum sheets, tubing extrusions and other non ferrous metals such as copper, brass, lead and magnesium. For smooth cutting, use lots of lubricant and a clamping device. 

This material must be clamped firmly to the table on both sides during cutting operation. The use of coolant is very important.  

Features 

• Carbide tipped for maximum performance
• This blade is furnished with a Negative 6° hook angle for a reasonable finish
• This hook angle prevents self-feeding of materials and gives the operator maximum control over the feed of the cut 

Specifications 

• Diameter 10in
• Teeth 80
• Kerf (B) .126in (3.2mm)
• Bore 5/8in
• Grind MTCG- Modified Triple Chip Grind
• Hook Angle - 6°