Specifications
- Battery 11.1VDC 2000mAh Li-ion
- Rated Power 16W
- Charger Input Voltage 100-240VAC 50/60Hz
- Battery Charging Time ~2hrs
- Non-Stop Running Time (Full Charge) 1hrs
- Running Cycles (On Full Charge) 340 ON-OFF cycles of 10 seconds
- Stand-by Mode (Charge Hold) 25 days
- Pump Service Life 100000+ ON-OFF cycles / 800+ hrs. continuous
- Rated Air Flow 0.5cfm ( 15 L/min )
- Maximum Vacuum Rate 11.6Psi (0.8 Bar, 80 kPa)
- Maximum Lifting Capacity 330Lbs ( 150 kg )
- L x W x H 11.67 x 7.12 x 4.76in ( 297 x 181 x 121 mm )
- Net Weight (With Battery) 2.6Lbs ( 1.2kg )
- Working Temperature 32°F~140°F ( 0°~60 °C )
Lifting Capacity
Max Lifting Force
This table provides a rough estimation of the max perpendicular adhesion force and max parallel adhesion force on different materials. These values may vary depending on material and surface conditions.
This table provides a rough estimation of the max perpendicular adhesion force and max parallel adhesion force on different materials. These values may vary depending on material and surface conditions.
 | Perpendicular Hold  | Parallel Hold  |
|---|---|---|
| Glass | 330Lbs ( 150 kg ) | 220Lbs ( 100 kg ) |
| Ceramic Tiles | 330Lbs ( 150 kg ) | 220Lbs ( 100 kg ) |
| Metal | 242Lbs ( 110 kg ) | 176Lbs ( 80 kg ) |
| Plastic | 220Lbs ( 100 kg ) | 176Lbs ( 80 kg ) |
| Wood | 176Lbs ( 80 kg ) | 132Lbs ( 60 kg ) |
| Rough Slate | 176Lbs ( 80 kg ) | 132Lbs ( 60 kg ) |
| Rough Concrete | 176Lbs ( 80 kg ) | 132Lbs ( 60 kg ) |
| Dry Wall | 132Lbs (60 kg ) | 88Lbs ( 40 kg ) |