Overview:
The SawStop Industrial Cabinet Saw is the definition of industrial grade. It is the heaviest, most powerful and highest quality 10in cabinet saw available. The 7.5HP, 3ph, 230v configuration with a 36in Industrial T-Glide Advance Fence Assembly offers the durability, versatility, and the peace of mind only SawStop's patented safety system can provide.
Features:
- 36in T-GLIDE ADVANCE FENCE ASSEMBLY: The 36in T-Glide Advance Fence & Rail are made of heavy-gauge steel for sure lockdown and reliably square cutting for years without deflection. The multi-function aluminum fence face provides the ability to use in three positions, with a dovetailed groove for attaching accessories and jigs.
- STRENGTH & STABILITY: The Industrial Cabinet Saw is almost 700lb of iron and steel, built for heavy-duty cycles with maximum stability and precision
- EXPANSIVE TABLE: Larger, heavier tabletop provides an extensive cutting surface
- DUST COLLECTION: 99% dust collection is delivered above the table with the included dust collection blade guard, and below the table with advanced shrouding around the blade. Available Overarm Dust Collection (Model # TSA-ODC, sold separately) routes dust away from the blade and into the 4in port.
- SAWSTOP PATENTED SAFETY SYSTEM: Stops a spinning blade on contact with skin. The blade stops in less than 5 milliseconds, and drops below the table, minimizing a potentially life-altering injury to a mere scratch.
- ADDED SAFETY: The Industrial Cabinet Saw has an integrated Lock-Out Tag-Out switch that cuts power to the saw ensuring that only authorized operators can operate the saw. Interlock switches on the motor access panels prohibit saw operation if any doors are unlatched.
- RELIABILITY: The Control Box houses the on-off switch, power paddle, and on-board computer, and constantly checks that all systems are working to reliably keep you safe.
- 36in Industrial T-Glide Advance Fence System provides smooth operation, three operating positions (high, low, L-fence), a dovetail groove for attaching accessories and jigs, precision measurement with two magnifying indicators (high and low position) and sure lockdown without deflection.
Specifications:
- Horsepower: 7.5HP
- Motor: 7.5HP, 3 phase, 230v, 17.8A, 60Hz, TEFC
- Overall Saw Dimensions: 69-1/4in W x 36-1/2in D x 34in H
- Saw Body Footprint: 20in W x 25in D (Cabinet)
- Cast Iron Table: 24in W x 30in D
- Cast Iron Table (with Extension Wings): 44in W x 30in D
- Extension Wings: 10in W x 30in D each
- Extension Table 36in: 24in W x 30in D
- Shipping Weight (with 36in Fence System): 755lb (4 boxes)
- Shipping Dimensions (Saw Body Only): 40in W x 40in D x 40in H
- Shipping Weight (Table Saw Only): 640lb (approx.)
- Assembled Weight (with 36in Fence System): 635lb (approx., actual weight varies by motor size)
- Weight (Table Saw Only): 530lb (approx., actual weight varies by motor size)
- Blade: 40-tooth Titanium, 5/8in arbor
- Blade Diameter: 10in
- Blade Tilt: Left
- Blade Kerf: 0.118in (3mm)
- Blade Plate Thickness: 0.078in (2mm)
- Max Depth of Cut, Blade at 0°: 3-1/8in
- Max Depth of Cut, Blade at 45°: 2-1/4in
- Max Rip, Right of Blade: 36in
- Max Rip, Left of Blade: 12in
- Dado Diameter: 8in (requires dado brake cartridge & insert)
- Dado Max Width: 29/32in
- Arbor Diameter at Blade: 5/8in
- Arbor Runout: 0.001in maximum allowable runout
- Main Bearing Size: 62mm OD x 30mm ID
- Second Bearing Size: 52mm OD x 25mm ID
- Table in Front of Blade (Max Elevation): 10-3/4in
- Table Behind Blade (Max Elevation): 10in
- Table Flatness Measured Diagonally: 0.010in maximum gap
- Belts: 2 V-ribbed belts, arbor b. static dissipative
- Blade Alignment with Miter Slot: 0.010in maximum displacement
- Deviation of Miter Gauge Indexing Stops from Actual: ±0.25°
- Alignment Between Splitter and Blade: 0.010in maximum difference
- Miter Slots: T-shaped, 3/4in at top, 1in at bottom, 3/8in deep
- Miter Slots Center: 11-1/8in center-to-center
- Miter Slots Info: 5-1/2in (arbor flange to center of right slot)
- Dust Collection Port Diameter: 4in
- Dust Collection Blade Guard: polycarbonate, extends only 1-3/16in to right of blade
- Blade Guard (Dust Collection) Port Diameter: 1-1/2in outside, 1-1/4in inside
- Insert: zero clearance, phenolic core, melamine surfaces
- Hand Wheels: 8in diameter, cast iron with chrome handle
- Riving Knife / Splitter Thickness: 0.090in (2.3mm)
Includes:
- (2) Cast Iron Extension Wings
- (1) Miter Gauge
- (1) Dust Collection Blade Guard
- (1) Riving Knife
- (2) Blade Wrenches
- (1) Push Stick
- (1) 10in Blade
- (1) Standard Lockdown Insert
- (1) Standard Brake Cartridge
- (1) Owner's Manual
- (2) Hardware Packs
- (1) 3mm Hex Key
- (1) 5mm Hex Key
- (1) 8mm Hex Key
- (1) Blade Spacing Adjustment Gauge
Warnings:
- This product can expose you to chemicals including wood dust, which is known to the State of California to cause cancer. For more information, go to www.P65Warnings.ca.gov.