Titebond Quick & Thick Multi-Purpose Glue is the thickest, fastest-drying glue available for use with porous and semi-porous materials. It is ideal for finish trim, crown molding, baseboards, window casings and other applications requiring a professional-strength, no-run wood glue. Titebond Quick & Thick Multi-Purpose Glue provides a strong initial tack and fast speed of set, yet allows realignment of working pieces. It also develops a bond stronger than the wood itself, offers excellent sandability and is unaffected by finishes.
Features & Benefits:
- 2x Faster - 3x Thicker
- Thick - No-runs, No-drips
- Versatile - Bonds most porous and semi-porous materials
- Fill small cracks and gaps
- Strong initial tack - Fast set
- Unaffected by finishes
- Excellent sandability
- Good heat resistance
- Nonflammable - No offensive odor
- CONFORMS TO ASTM D-4236
Application Temperature: Above 50°F.
Open Assembly Time: 3-5 minutes (70°F./50%RH)
Total Assembly Time: 10-15 minutes (70°F./50%RH)
Minimum Required Spread : Approximately 6 mils or 250 square feet per gallon
Required Clamping Pressure: Enough to bring joints tightly together (generally, 100-150 psi for softwoods,125-175 psi for medium woods and 175-250 psi for hardwoods)
Method of Application: Plastic bottles for fine applications; glue may also be spread with a roller spreader or brush.
Cleanup: Damp cloth while glue is wet. Scrape off and sand dried excess.
Bond Strength ASTM D-905 (On Hard Maple)
|Room Temperature||3,000 psi||7%|
|150°F. Overnight||650 psi||0%|
Type: Thixotropic polyvinyl acetate
Calculated VOC: 2.4 g/L
State : High-viscosity liquid
Weight Per Gallon : 9.0 lbs.
Color : Beige
Dried Film: Translucent
Flashpoint : > 200°F.
Solids : 60%
Freeze/thaw Stability : Stable up to 2 cycles
Viscosity : 36,500 cps
pH : 4.8
Chalk Temperature: To assure a good bond, 50°F is the lowest recommended temperature of the glue, air and materials during application.
Storage Life : 24 months in tightly closed containers at 75°F.
Titebond Quick & Thick Multi-Purpose Glue is not intended for exterior use or where moisture is likely. For exterior applications, use Titebond III Ultimate Wood Glue or Titebond II Premium Wood Glue. Not for structural or load bearing applications. Do not use when temperature, glue or materials are below 50°F. Freezing may not affect the function of the product but may cause it to thicken. Agitation should restore product to original form. Read MSDS before use. KEEP FROM FREEZING. KEEP OUT OF THE REACH OF CHILDREN.