Overview:
INCRA T-Rules make it very easy to draw exact lines in either direction.
INCRA scores again with its precision steel rule. Select the proper slot or hole, insert a .5mm mechanical pencil, and mark the measurement with dead-on accuracy.
Micro-fine guide holes and slots at every 1/16in, 1/32in and 1/64in scale position instantly locate your sharp pencil or scribe at the exact measurement with zero uncertainty and no eye strain! The Metric versions include marking holes and slots at every 1mm, 1/2mm and 1/4mm.
Features:
- With the pencil in a marking hole, slide along any edge to draw perfectly placed horizontal lines.
- Use as a precision T-Square to draw perpendicular lines.
- T-bar is easily adjusted for making fast vertical measurements.
- Imperial T-Rules offer INCRA's patented marking holes at every 1/16th, 32nd and 64th from 0 to 6in (6in version). All three Imperial lengths also offer 0 to 3in height markings on the end in 32nds.
- Metric T-Rules offer INCRA's patented marking holes at every full, 1/4, 1/2 and 3/4mm from 0 to 150mm. They also offer 0 to 50mm height marking slots on the end in millimeters.
Specifications:
- Imperial Part Numbers: T-RULE06, T-RULE12, T-RULE18
- Imperial Lengths: 6in, 12in, 18in
- Metric Part Numbers: T-RULE150M, T-RULE300M
- Metric Lengths: 150mm, 300mm
- Rule: Precision steel
- Marking Pencil: .5mm mechanical pencil