Overview:
This pro-value bundle pairs the Metabo HPT NV65AH2M 2-1/2in pneumatic coil siding nailer with the C3607DWAQ4M 36V MultiVolt 7-1/4in rear handle circular saw and the UC18YSL3B1 MultiVolt battery and charger starter kit. Targeting siding and sheathing crews, the NV65AH2M drives wire or plastic coil nails at up to 3 per second while the lightest-in-class cordless rear handle saw handles OSB, panels, and framing cuts.
Features:
- NV65AH2M Siding Nailer: Pneumatic coil, drives 1-1/2in to 2-1/2in wire or plastic collated nails (.090-.099in diameter), selective actuation switch (sequential or bump fire)
- NV65AH2M: Side-load tilt-bottom magazine for fast reloads, tool-less depth of drive adjustment, adjustable air deflector, no-mar nose cap, plastic shield, 4.8lb lightweight design
- C3607DWAQ4M Circular Saw: Lightest rear handle saw in its class, brushless motor, 5,100 RPM no-load speed, blade-left sight lines, up to 500 2x4 cuts per charge
- C3607DWAQ4M: 53 degree bevel range with stops at 0, 45, and 53 degrees; magnesium base; rafter hook; electric brake
- UC18YSL3B1: 36V/18V MultiVolt 4.0Ah/8.0Ah battery with rapid charger; approximately 52-minute charge time; built-in USB port on charger
- MultiVolt battery powers all Metabo HPT 18V and 36V slide-type tools
- Lifetime lithium-ion tool body warranty on the circular saw
Specifications:
- Siding Nailer Type: Pneumatic Coil
- Siding Nailer Fastener Range: 1-1/2in to 2-1/2in
- Siding Nailer Fastener Diameter: .090-.099in
- Siding Nailer Weight: 4.8lb
- Circular Saw Voltage: 36V MultiVolt
- Circular Saw Blade: 7-1/4in
- Circular Saw No-Load Speed: 5,100 RPM
- Circular Saw Cut Depth: 2-7/16in
- Circular Saw Bevel: 53 degrees max
- Circular Saw Weight (bare tool): 8.2lb
- Battery: 4.0Ah (36V) / 8.0Ah (18V)
Includes:
- (1) NV65AH2M 2-1/2in Pneumatic Coil Siding Nailer
- (1) C3607DWAQ4M 36V MultiVolt 7-1/4in Rear Handle Circular Saw (bare tool)
- (1) VPR 24-Tooth Framing Blade
- (1) UC18YSL3B1 36V/18V MultiVolt 4.0Ah/8.0Ah Battery and Rapid Charger Starter Kit